[NRVR-Members] NRVR Eggtimer build party 1/26 at 3pm

William Noble wnoble at nr.edu
Tue Jan 15 18:18:38 CST 2019

I am going to try to make this eggtimer build.  Need information on soldering iron and tip  I would need.

Bill Noble

NRCC Engineering Program Head

Office: 540-674-3600 ext 4302

Email: wnoble at nr.edu

Spring 2019 Schedule (class and class prep):

MW 11:30 am - 5 pm

TuTh 9:30 am - 1:30 pm

F       11 am - 12 pm

"I have found the paradox that if I love until it hurts, then there is not hurt, but only more love."

Saint Teresa of Calcutta

From: nrvr-members-bounces at server2.nrvr.org <nrvr-members-bounces at server2.nrvr.org> on behalf of Weeks, Thomas <t.weeks at vt.edu>
Sent: Monday, December 17, 2018 11:20:06 AM
To: bruce fette via NRVR-Members; NRV Rocketry Members
Subject: Re: [NRVR-Members] NRVR Eggtimer build party 1/26 at 3pm

I would also encourage all members to come and attend, even if you're not soldering.  Just attending means that you'll get to see a number of these Egg Timer kits up close, see how easy/hard they are to build, and get a good feel for if it's something you might be interested in or not.

I just have a couple of requests.. and one question for soldering-participants:


1) Bring Solder-Proofing for our Desks: If you are planning on soldering, please bring a cardboard surface that will protect the desks and carpets from molten solder.  If we leave melted solder on the desks or jodged int he carpet, I'm not sure we would ever be welcome in the CRC again. 😉  If worried about ESD (static proof grounding).. I'll be bringing a spool of Al Foil to give you a safe, grounded surface we can tape onto your cardboard.

2) Bring Magnification Aids: If you have never soldered surface mount components before.. and have no form of magnifier.. I would suggest possibly picking up one of these low cost ($5) units: https://www.harborfreight.com/38896.html

or one with better lighting:



Any Participants NOT Have Soldering Iron? If anyone who is bringing a kit to solder doe NOT have their own soldering iron/tools, please contact Jordan and I.  At a minimum, I suggest an pencil tip soldering iron & stand, a sponge, solder, desoldering gear (sucker or wick), and a power strip.


From: nrvr-members-bounces at server2.nrvr.org <nrvr-members-bounces at server2.nrvr.org> on behalf of Jordan Truesdell <jordan at truesdell.org>
Sent: Monday, December 17, 2018 10:08 AM
To: Shinpaugh, Kevin; bruce fette via NRVR-Members
Subject: [NRVR-Members] NRVR Eggtimer build party 1/26 at 3pm

The build party will be at 1880 Pratt Drive, 2nd floor conference room (#2018), January 26 at 3pm - big thanks to Tweeks for getting us the space!!

Bring your kit(s), soldering iron, tweezers, and your best set of eyes. If you have other soldering gear (antistatic mat, helping/third hands, lucky desoldering bulb) feel free to bring that, too.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://server2.nrvr.org/pipermail/nrvr-members/attachments/20190116/1c8a7c37/attachment.html 

More information about the NRVR-Members mailing list